DTC Mazda P0A8D Short Explanation

The video focuses on the basic Mazda specific diagnostic error code. Contents: 0:21 Basic DTC analysis according to OBD2 protocol standard. 1:48 Insight into programming - an explanation of what a bit is and how a byte is formed - decoding the Error Code to the base programming 2:58 A diagnostically understandable description of the Diagnostic Trouble Code 3:05 Basic error definition - Possible causes or errors of the car and its parts describing the mentioned error We will continue to work on improving the content. Our efforts at Maxidot s.r.o.the video content gets better. #mazda Make: Mazda Code: P0A8D Definition: 14-Volt Power Module System Voltage Low Description: Voltage less than 10 volts on input circuit (GY or R) for 5 seconds continuously,or if the 12-volt battery has recently had the terminals disconnected or cleaned or,if a new 12-volt battery has been recently installed may,cause the BCM to set this DTC.WARNING: Wear high-voltage insulated safety gloves and a face shield when working with high-voltage batteries or cables.The high-voltage insulated safety gloves should be of the appropriate safety and protection rating.Inspect the gloves before use and always wear them with the leather outer glove.Any hole in the rubber insulating glove is a potential entry point for high-voltage.Failure to follow these instructions may result in serious personal injury or death.WARNING: Turn OFF the ignition switch for a minimum of 5 minutes before removing high-voltage...