Windows Server 2012 R2 Setting Static IP Tutorial

Once you have installed Windows Server 2012 R2 you will probably want to set up a static IP address. This is simpler than breaking an egg! Have a look at the video below to do it in less than a minute! For more visit: Transcript (machine generated so it contains errors) Hello today than I show you guys how to set up a static IP address in server 2012 or two. It&a very simple thing am if you are using your server to 12 with an internal LAN or so you basically have your own numbers, created the IP address for beard version or version 6 am if you&using your server connected to the Internet and you basically have your own static IP address you purchased, et cetera the importing that okay am how this will be done is work and assume were basically working for a land that have this thing with an alarm and were gone are set up that way. Okay, the simplest thing is going to the screen. The start screen and type in network and sharing Centre and the file itself. Just click on that. Okay, this is your network setting. Click on that click on properties. IP version forward in a deal with today, but it& the same thing as a bigger number and a hex format. Okay, click on properties like a use the following IP address. This is what makes it your own IP address, your static IP address. It will always use that I Am wonderland. I&using my own little numbers that I like for the setting like a subnet mask, default gateways, basically what&coming through from my in this case...