Tire Service Kit | How To | 2021 Ram ProMaster City

Learn how to perform emergency tire repair with this handy, on-board accessory. This video covers how to use the 2021 Ram ProMaster City flat tire repair kit including: where to position the valve stem when parking, how to connect the filler tube to the tire valve, how to assemble the sealant bottle with the compressor holder, and how to activate this kit in order to inflate the flat tire. You will also learn important information about testing your tires when using this tire inflation kit. Transcript [music playing] If equipped, the Tire Service Kit is located under the passenger seat. This kit will provide a temporary tire seal allowing you to drive your vehicle up to 100 miles or 160 kilometers with a maximum speed of 50 mph or 80 km/h. Remember that Roadside Assistance may be available; consult your Owner’s Information for details. If you do experience a flat tire, pull over to a safe location and turn on your hazard lights. Position the tire that needs inflating so that the valve stem is located near the ground. This will allow the Tire Service Kit hose to reach the valve stem with the Tire Service Kit flat on the ground. Place the transmission in Park. Turn off the ignition and set the parking brake. Place the Tire Service Kit on the ground next to the flat tire. Remove the cap from the fitting at the end of the hose. Remove the valve stem cap and screw the clear flexible filling tube to the tire valve. Insert the power plug into the vehicle’s power outlet...