Learn how to remove your 2015-2017 Lexus NX200T Rear bumper cover

Watch this easy DIY on how to remove your rear bumper cover for the 15-17 Lexus NX200T. It&a quick and painless removal with mainly plastic clips and a few screws/bolts. 0:00 Start 0:16 Intro 0:31 Fender Flare Removal 2:25 Bumper Ends 3:04 How to pop off the bumper 3:18 Lower bumper screws & clips 4:19 Lower bumper plastic cover 5:17 Under the tailgate 6:51 Remove the bumper 7:36 Outro TOOLS NEEDED: You will need a 10mm wrench or socket wrench, with a panel clip removal tool, or a flat-head screwdriver. Thank you for stopping by and watching our video. The Lexus NX200T shares some similarities to the Toyota Rav4. Both vehicles offer a great and easy way to remove the rear bumper covers without too much difficulty. We started on the fender flares which are held on by a few plastic clips. Get ready to use your flat-head screwdriver or panel clip remover quite a bit on this vehicle. There is an Allen bolt which is a bit out of place the but size of the Allen key is a four. Once all the clips and the Allen bolt are removed, gently pull the fender flare off. This will expose a bolt underneath that will realize the bumper ends. Next, we moved to the bottom of the rear bumper and removed the lower cover. We think it&called the lower bumper cover or lower valance, but it is held on by 8 plastic clips. So, get that panel clip remover or flat-head screwdriver out and get to work. There are a couple of 10mm bolts on the far corners that hold the bumper to the splash shield. Remove...