Canon Printer Error Code 5800 (A Quick Guide To Meaning, Cause And Solutions)

Canon Printer Error Code 5800 (A Quick Guide To Meaning, Cause And Solutions). In this video tutorial i will show how to fix the Canon Printer error code 5800. Error code 5800 is a printer code that signals a faulty waste ink absorber. The waste ink absorber is a sponge-like part that soaks up excess ink from the cartridges to keep them clean. Over time, the absorber gets saturated and presents error code 5800. The following is the common cause of the error: ⦁ The waste ink absorber is full and cannot absorb excess ink. Now, let’s look at the best solution to fix the error: Resetting the waste ink counter. ⦁ Turn off the printer by pressing the Power button. However, do not disconnect from the power source. ⦁ Press and hold the Power and Stop/Reset buttons simultaneously. ⦁ With the printer powered back on, press the Stop/Reset button twice while pressing the Power button. ⦁ The printer will go into the service mode. You will see the light of the On/Off button glowing. ⦁ Press the Stop/Reset button four times to reset the waste ink counter. ⦁ Reboot the printer and then check if the error is resolved. ⦁ If the error persists, contact Canon customer service for consultation. If you found this tutorial helpful, kindly show your support by giving it a thumbs up and sharing your thoughts in the comments below. Your feedback is greatly appreciated. Thank you! ►Disclaimer◄ This channel DOES NOT promote or encourages any illegal or unethical activities and all content...