TRS Tips: How To Retrofit Headlights with Morimoto Mini H1 Bixenon Projectors

It&no wonder the Morimoto Mini H1 Bi-xenon from TRS is one of the most frequently retrofitted projectors in the world. With the 6.0&performance that can compete with the best of OEMs combined with ultra ease of installation, our Mini&outsell other projector options 2:1 ****************************** Step 1: Insert threaded shaft through the front of the reflector bowl (big silicone washer installed) (Mini Gatling Gun users take note of step 6 in advance) Step 2: Install the H4 or H7 adapter plate, with the notched side at 12:00 to ensure the projector&rotation is level. (Skip this step for non H4, H7 applications, manual rotation adjustment is required) Step 3: Use a 27mm wrench or socket to tighten the hex lock ring. Do not over-tighten, or completely tighten until you are sure this will be the last time the projector will be mounted (the threads will deform and lock on once fully tightened) Step 4: Install the 3-prong bulb holder using a magnetic screwdriver (for ease of installation) - and ensure that all 3 feet are evenly and completely seated down into their channels. If the 3 feet do not go down into their channels, more space will have to be created forward of the lock ring. (flip the adapter plate around, grind the housing down more, or remove silicone washers) Step 5: Test fire the bi-xenon solenoid mechanism 30-40 times to be sure that the hinges are still sliding as they should be. Since this mechanism is made of fairly thin metal, it is important not to...