Antique Blowtorch Restoration - with testing! (1080p_50fps_H264-128kbit_AAC)

Antique Swiss Blowtorch Restoration - with testing! Oerlikon Record In this video i&restoring an antique swiss blowtorch. Like, comment, subscribe. I found this old blowtorch, which was perfect for a nice restoration video. Before i started to disassemble i wanted to know if it still works and it did. The flame was quiet inconsistant and fire leaked everywhere. By the first look i saw that the front piece was damaged very hard, the bolt on top had a lot of slack, the handle of the pump was broken and it didn&lock. After this first look i started to disassemble. All the parts were really easy to remove and it went very well and fast. To remove the soot and patina i used a mixture of flour, salz and vinegar. This is a very effective and cheap method, it takes a bit of time but it&worth to wait. I left the parts for 7 days. I made a new bolt on the lathe and recut the thread. To make the bolt black i heated it up to around 300-400°C and layed it in olive oil after it, that makes it also rust proofing. Because i couldn&fix the front piece, i decided to make a new one and it worked very well. I made the gasket for it out of an exhaust gasket, because it had one layer aluminium in it i first made a hole on the mill, then cut it roughly out and finished it with the belt grinder. Next up i removed all the scratches from the tank with sandpaper. As i can&engrave i decided to scratch the letters deeper with a needle and then i polished it. I did the same with the same with the...