Bike Tire Repair Kit Tool Set Patch Rubber Glue from banggood.com

Аватар автора
Помощники для строительства и ремонтной компании
100% Brand New and practical and very cheap Used for all kinds of Bicycle A great multifunctional bike repair set With good quality, durable, full function Easy to carry and convenient to use A must-have for cyclist on short or long journeys Package Includes: 1 x 8ml Rubber Solution 3 x POM Tire Levers 6 x Cold Patch 25mm, round 3 x Cold Patch 30mm, round 2 x Cold Patch 32 x 50mm, oval 1 x Metal Rasp 1 x Manual 1 x Plastic Box Instructions: "How to fix punctured/flat bike tire" Remove the flat tire from the bike, by removing the nuts. Take out the flatted tube from the tire, using the flat edges of Curved Lever Tools (be very careful not to damage the tube inside). Once the tube is out, use a bicycle pump to fill the tube until it is firm. Then, look for the leak in the tube, using a bucket of water. Watch for air bubbles while holding the inflated tube underwater. There may be more than one leak, so check the entire tube. After locating the leak(s), remove the tube from the water, wipe it dry, and mark the punctured spot(s) with a chalk. Scrape the damaged area of the tube with the Rasp tool (sanding tool), to clean and roughen the surface for the patch. Rough surface would ensure strong bond to the patch. The area should be about the same or slightly larger than the patch that you about to apply. Apply some of the adhesive, Glue tube (vulcanization rubber cement), to the scraped area of the tube. Let the glue stand for 3-5 minutes, until it almost dry. Select patch of...

0/0


0/0

0/0

0/0