BetaFPV Cetus Pro Firmware flash with BETAFPV Configurator. DO NOT flash if it is working good.

Hi, This video will show you how to prepare your drone, find the official software and firmware, how to install the BETAFPV Configurator, connect the drone to the computer and flash the firmware. I hope this video helps you. You are responsible for your own actions in this matter. Steps: and download the latest Configurator. 3. Install the BETAFPV Configurator. 4. Open the BETAFPV Configurator and let it run. 5. Connect the USB C to the USB C adapter and then plug it into the drone. 6. Hold down the button on the drone and while holding the button down, connect the USB cable to the computer. White LEDs should come on, and you can release the button. 7. As you connected the drone to the computer, there should appear a COM port in the Configurator in the upper right corner. IMPORTANT: Do not try to connect your drone on the "Welcome" screen before you flash your firmware. 8. Go to the "Firmware Flasher" page and press the "Connect" button in the upper right corner. The icon should become red and change the text to "Update Firmware" 9. Load your previously downloaded .bin file. 10. Press the "Flash FC" button. 11. When the process is done the LED´s should start blinking in "white-blue-ish" colors and you can go back to the "Welcome" page, and now you can press the "Connect" button in the upper right corner. If the colors are blinking in RED, then you need to change the firmware version. 12. The drone should connect with the configurator, and you are able to change some...