Brother DCP-L2540DW wifi connection setting Guide

This video compatible with following models DCP-L2540DW MFC-L2700 Please follow the steps below for Wi-Fi connection setup. Follow the steps below. Connect the AC power cord to your Brother machine and then connect it to an AC power outlet (electrical socket). Turn on your Brother machine. Press Menu. Press Up or Down arrow key to choose the Network and press OK. Press Up or Down arrow key to choose the WLAN and press OK. (This step might be skipped in some models.) Press Up or Down arrow key to choose the Setup Wizard and press OK. When WLAN Enable? appears, enable the wireless network. This will start the wireless setup wizard. The machine will search for your network and display a list of available SSIDs. When a list of SSIDs appears, press Up or Down arrow key to choose the SSID you want, and then press OK. Do one of the following If you are using an authentication and encryption method that requires a Network Key, enter the Network Key. Enter the WEP key, and then press OK to apply your settings. To apply the settings, choose Yes. To cancel, choose No. If your authentication method is Open System and your encryption mode is None, go to the next step. If your WLAN access point/router supports WPS, WPS is available appears. To connect your machine using the automatic wireless mode, press Up arrow key. (If you choose No, enter the Network Key you wrote down in the first step.) When Press WPS on rtr appears, press the WPS button on your WLAN access...