Repair ESP32 COM port not detect LED Off common broken diode

Repairing an ESP32 USB Port That Is Not Detecting a COM Port or Connecting 00:00 ESP32 COM port not detect and no light 00:26 Test Diode may be broken 00:35 Good Diode, not OL 00:39 test jumper with good diode 00:44 set strip (minus) diode position 00:49 replace broken diode on ESP32 00:58 Now ESP32 after repair, RED LED is On The ESP32 is a popular microcontroller board that is often used for hobbyists and prototyping. One common problem that users encounter is that the ESP32 USB port may not be detected by the computer. This can prevent you from uploading code to the board or using it for other purposes. Symptoms: Symptoms of a broken diode on an ESP32 board can include: No power: If the diode connected to the power supply is broken, the board will not power up. USB port not working: If the diode connected to the USB port is broken, the board will not be recognized by the computer. Missing voltage levels: Specific components on the board may not receive proper voltage due to a faulty diode within their circuit In some cases, this problem can be caused by a broken diode on the ESP32 board. The diode is a small electronic component that allows current to flow in one direction but not the other. It is used to protect the ESP32 board from damage if the USB cable is plugged in incorrectly. How to test, if ESP32 broken Plugin USB port If no LED, ESP32 board broken. First step if ESP32 LED indicator not light, may be small diode broken. ESP32 cant connect to computer, or...