How to reset and set up your 4G V380 PTZ Solar Camera.

How to reset and set up your 4G V380 PTZ Solar Camera. 1. Open the back case of the camera 2. click on the reset button. Device initialization Press and hold the reset button for several seconds, the device will prompt "Restore Factory Default Setting" and the indicator light will flash alternately, which means the reset is successful. 1. "When the device indicator is off, it means the device is powered off or sleeping: 2. "When the device indicator is red, it means the device is powered on and wakes up, but it is not connected to the network; 3. "When the device indicator is yellow, it means that the device is connected to the network 4. "When the device indicator red light flashes continuously, it means that the device cannot recognize the SIM card, please check whether the card is inserted; 5. "When the device indicator light flashes red double continuously, it means that the device recognizes the SIM card, but it is not connected to the Internet. Please check whether the SIM card has data. If the device indicator does not have a steady yellow light, please check the following items in turn: 1. Please confirm whether the SIM card is inserted; 2. Confirm whether the SIM card is valid and the data flow sufficient, 3. Whether the 4G signal at the current location is normal; 4. Whether the device antenna is broken. Precautions for installation and use of 4G low-power devices: 1. For new devices, please charge the battery fully, and the first charging time should be more...