BMG E3D V6 Direct-Drive for Ender 3 V2/Pro [Assembly]

Assembly instructions for my BMG E3D V6 Direct-Drive Mount for Ender 3. Are you ready to push your Ender 3 to the next level? Convert your Ender 3 / Ender 3 Pro / Ender 3 V2 or CR-10 to direct-drive by combining some of the best components available for 3D printing: the BondTech BMG extruder and the E3D V6 hotend. This direct-drive mount is unlike any other. It was designed after trying a dozen other models and improved on the basis of this experience. Don&be fooled by the simplicity of this direct-drive mount. As Albert Einstein might says: "Everything should be made as simple as possible, but no simpler”. This direct drive makes no compromises and is designed with unique requirements: * Specially optimized for the E3D V6 / BondTech BMG/ BLTouch / 5015 blower fan combo. Get trouble-free extrusion and perfect 1st layer each and every print. Goodbye clogging, goodbye under-extrusion, goodbye manual adjustment of the z-offset with a sheet of paper : Just print! * Easy to install & maintain: high accessibility, no adjustments. Can be completely disassembled and reassembled in minutes, without having to readjust anything. Allow to reach the highest accuracy/repeatability. No need to periodically change the PTFE tube thanks to the all-metal hotend. * Perfect retractions: Hotend connected directly to the extruder. The PTFE tube length is only 37mm! This results in more responsive extrusion, cleaner starts & stops and perfect retractions. Compatible with flexible filaments/TPU...