Kent USA KGS 818AH Automatic Surface Grinder Operation

Аватар автора
Нежный уголок
Kent USA KGS 818AH Automatic Surface Grinder Operation First, let’s turn on the machine. Check incoming power Switch on electrical cabinet breaker Release E-Stop Press Circuit Power Make sure that the spindle is rotating clockwise. If it’s rotating counterclockwise, correct it by switching the L1 and L3 leads in your power connection. Then, let’s Connect the Hydraulic Hoses Recommended Oil DTE 26 Hoses labeled T-T and P-P Now, let’s Go over the control panel Coolant ON/OFF Hydraulics ON/OFF Check that Hydraulic Open valve body; adjust flow with this knob Table movement to the left Table movement to the right Spindle ON/OFF Manual/Automatic Cross Feed Switch Table forward and reverse button (when on manual mode) Potentiometer to control cross feed increment Then, adjust the Cross Feed Limits as shown There are two dogs on the right side of the saddle. Adjust these with respect to the workpiece. Lastly, adjust the Table Limits by moving the dogs on the table to adjust the left and right limits Move dogs on table to adjust left and right limits Keywords: precision machining, machining mechanical engineering, cnc machining process, cnc quality, cnc manufacturing technology, machining metals, torno cnc

0/0


0/0

0/0