Restoration of Broken Xbox 360: This Was Unexpected!! Retrobright ASMR

Restoration and repair a broken and dead XBOX 360 In this video, you will see a full episode of restoring and repairing of a dead Xbox 360, also you can see a technic to find out how to silence the Xbox 360 fans. From the outside, the front panel was broken, the machine was heating up quickly, and the disk drive and fan were making horrible noises. After opening the Xbox, I noticed something interesting. Most of the metal panel under the frame was rusted due to spilling liquid, and this damage caused by the solution also damaged the main board and parts of the board were corroded. Also, after opening the heatsinks, I realized that the thermal paste of this Xbox 360 had not been replaced for a long time and the device was practically without silicone paste, which justifies the extremely high temperature of the device. To fix a dead Xbox 360 laser, there is a lot of advice to be found on the internet, most of which are hard to understand. I was looking for a simple home solution to repair my Xbox 360 disc drive. First of all, the laser should be cleaned using cotton swab and alcohol. If this does not work, the next solution can be used. The cost of a replacement disk drive is relatively high. For this, which is known as laser adjustment or pot tweak, using a multimeter and a screwdriver, reduce the laser resistance step by step and with very short increment and after each step, you should test the disk drive to see if it works or not, until the laser is able to read the...