Ricoh M C2000 copier reports the error "Error installing: Toner KMCY", teach you how to solve it!

Hello everyone, today I would like to share with you some tips for the Ricoh M C2000 copier. Solution to the error "Error Installed: Toner K/M/C/Y" The reason for this error is: The chip cannot communicate with the copier or the communication is blocked, causing the chip data to be damaged. This error reporting problem needs to be investigated and solved from the following two aspects; 1. If the chip is installed on the machine, an error occurs: Then we need to check whether the installation of the chip and the screen printing of the chip are consistent with the model of the machine. Whether there is too much toner accumulated inside the machine; If no problem is found, we will try a new set of chips. 2. If an error occurs during use: First, we need to determine whether the chip data was damaged during charging. The reason why the chip data is damaged when charging powder is that the powder path is not smooth; It is necessary to check whether the powder outlet of the powder cartridge and the powder inlet of the drum frame are blocked; Whether the parts of the powder supply pump are damaged, etc. If there is a problem, repair or replace it; Secondly, check whether other related parts of the copier are aging or malfunctioning. If there are, they also need to be repaired or replaced; Finally, when using the machine, be sure to choose a high-quality powder cartridge. And clean and maintain the machine regularly to prevent excessive toner accumulation inside the machine. Causes...