PS Vita Replaceable Battery Mod - SLIM - Tutorial How To Modify - 2000

Аватар автора
Авто без проблем: Долгая жизнь на дороге без преград и сюрпризов
Part 2 is meant for a 1000 vita but still applies. don&use the battery fixer app anymore, just turn the vita off for 2 minutes to make the vita check the batteries status. LiPo batteries, the batteries I use to mod, only last 1-3 years. This mod makes replacing a modded battery easy. Imagine every time you battery dies, you need to pull out the soldering iron - not with this mod. With this replaceable Battery Mod you can just buy a 3.7v battery with a JST plug and the vita will clip to it. With this mod you can also charge multiple batteries and change them out for a full battery on the go. (Bring a screwdriver) For this mod you need supplies: PlayStation Vita WifI or a converted 3G (PCI removed) Lithium Polymer (LiPo) battery I&using a 105060 3300mAh (actually has 3750mAh), 105060 means 10mm thick, 50mm wide, 60mm long Battery should come with a battery protection board Battery should come with a JST 2.0 male plug 10k thermistor within 1% and B value between 3350 and 3450 JST 2.0 female connector with wire. Get both male and female if your battery doesn&have one Use a different connector if you prefer! (Let me know!) Solder 60/40 Rosin Core Flux Paste (or your preferred flux) Electrical Tape For this mod you need tools: Phillips precision screwdriver Wire Strippers (or a way to strip wires) Pliers or something to pry/break plastic Soldering Iron (Any with a large tip, clean) Razor Blade or another plastic scraping or...

0/0


0/0

0/0

0/0