Cura Vs. Simplify3D: A Slicer Comparison with #3DBenchy

A quick comparison video I did of slicing settings between Cura and Simplify3D, using and identical slicing settings as a control for this experiment. Slicer settings for both slicers used were: Layer Height: 0.15mm Initial Layer Height: 0.1mm Wall Line Count: 2 Top Layers: 5 Bottom Layers: 5 Infill Density: 40% Infill Pattern: Triangles Printing Temperature: 205C Printing Temperature Initial Layer: 220C Flow: 100% Enable Retraction: YES Print Speed: 60 mm/s Outer Wall Speed: 50 mm/s Travel Speed: 150 mm/s Enable Print Cooling: YES Regular Fan Speed: 75% Maximum Fan Speed: 100% Enable Support: NO Build Plate Adhesion Type: Skirt Skirt Line Count: 2 **The above settings are typed like the settings in Cura, but can easily be translated to the labels that S3D uses** This video is not sponsored by Cura, Simplify3D, or the designers behind If you&interested in checking them out though, check out these links below: Feel free to subscribe, drop likes, and comment! Feedback is ALWAYS welcome!