How to install Mediatek USB VCOM drivers in Windows

This video explains how to manually install Mediatek USB VCOM drivers on a Windows PC. Drop a comment below if you have questions or reach out to us on the following platforms: 00:26 In this tutorial, I&be explaining how to manually install VCOM drivers on a 00:32 Windows PC. Now, VCOM driver is very important especially when you want to see SP flash tool 00:38 because without your VCOM drivers, you can&use SP flash. You'll 00:43 usually notice that when you try flashing a file or doing a readback using SP 00:48 flash tool without VCOM drivers, once you switch off your phone and 00:52 connect it to the PC, all you&see is the phone charging. That means you don&have VCOM 00:58 drivers. So in this guide, I&be explaining how to install VCOM drivers manually to 01:04 enable your phone and SP Flash tool communicate effectively. Now, if you&using a Windows 8 (or 10) PC 01:09 you&want to disable signature verification. I will not be going into 01:13 that here but just go to our forum, search for how to disable signature verification on 01:18 Windows 8 before you can install your VCOM drivers. So, the first thing you&want to do is to 01:25 open Device Manager so I&search for Device Manager. Alright! 01:35 In device manager, what you&want to do is click any of these items 01:41 then click on Action then Add legacy hardware. Click on 01:49 Next, you select Install the hardware that I manually select from a 01:55 list that is advanced, Click Next, here you just go...