iPad Pro 12.9 (2015) - Screen Replacement | Teardown Guide

In this tutorial, we&show you how to change the LCD screen of your iPad Pro 12.9 by yourself. Attention: There are two ways to change the LCD screen of the iPad Pro 12.9. Either you&using a new display that already has an LCD flex cable included (our recommendation!), or you&using a display that does not have LCD Flex and you&need to transfer it from the old display to the new one. This step is expressly recommended only for professionals since the flex must be soldered. The variety of individual solder joints is a potential source of error. If you do not work very meticulously at one point, this can lead to the display not working properly or only to a limited extent. So you should be absolutely sure that you can do it. Otherwise, we strongly recommend using a display with integrated LCD-Flex! In our tutorial, we show the variant with the integrated flex. Hint: The repair is at your own risk! We assume no liability for any possible damage to your device. ▬ Table of contents ▬▬▬▬▬▬▬▬▬▬▬▬ 1. Opening the device 01:29 2. Removing the home button flex as well as the front camera cover 04:44 3. Transferring the home button and the front camera cover to the new LCD screen 06:21 4. Removing the mainboard covering and interrupting the contact with the battery 07:53 5. Connecting the new LCD screen and closing the device 08:24 ▬ Used Tools ▬▬▬▬▬▬▬▬ Heat gun (you can also use a conventional hair dryer) ▬ Required parts ▬▬▬▬▬▬▬▬ ▬ About this channel ▬▬▬▬▬▬▬▬ On our...