1920 German 'Barthel' Stove Restoration - A 'my mechanics' Collaboration!

In this Video I restored an old rusted stove with a little help from &mechanics&Comment, Subscribe and Like if you enjoy :-) #mymechanics 1920 German &Stove Restoration - A &mechanics&Collaboration! In this Video I took care about this old stove. I bought it online from a private guy for around 15$. Its made by the brand "Gustav Barthel" and the model is "Norma E11". When I received it, the stove was in a bad condition. The metal was rusted and the brass tank had some serious cracks and bad solderings. The tanks cap was missing and the thread was mostly gone. I had to restore it! I started with disassembling this rusted stove, most of the screws and nuts were stuck and rusted. I couldnt even take out the old wick, it was full of soot and other stuff. After disassembling, i started restoring the brass tank, but after pulling out one dent i knew, that it has some serios defects. So i sent it to my friend &mechanics&who offered me repairing the brass tank. So i sent it to him and could focus on restoring the other parts. I proceeded with the stoves main metal body, it was rusted and badly repainted. So i put it into the sandblasting cabinet and sandblasted it pretty clean. After that, i took some linseed oil and attached a thin layer of oil to the blank metal parts to season them in the oven. It baked by 250 degree celsius, in this process the oil burns a rustproof layer into the metal, which is also black and heat resistant. Next step was restoring the burner. Since the...