Making a Mini Machete from a Stainless Bolt (1080p_50fps_H264-128kbit_AAC)

In this video i turn a stainless bolt into a mini machete. Timestamps: 0:05 – removing the thread of the stainless bolt 0:15 – forging the stainless bolt into a plate 0:54 – marking the shape of the machete on the plate 1:09 – bringing the machete roughly in shape with the angle grinder 1:30 – grinding the first side of the machete clean on the belt grinder 1:44 – roughly grinding down the thikness of the machete with the angle grinder 1:59 – taping the machete with carpet adhesive tape on the support plate 2:24 – grinding the second side of the machete clean on the belt grinder with support plate 2:42 – finishing the outside shape of the machete withe different file 2:58 – drilling two holes in the blade for the handle 3:28 – cutting off two pieces of brass for the handles with the angle grinder 3:50 – taping the brass pieces on the machete and drill them together 5:09 – bringing the brass handles roughly in shape with the angle grinder 5:46 – glueing the two handles, the two stainless rivets and the machete together 7:07 – bringing the handles in shape with the grinding wheel, belt grinder and file 8:10 – sharpen the knife roughly with the belt grinder 8:23 – polishing the knife 8:55 – sharpen the blade with a grinding stone 9:04 – final cutting test 9:13 – showing off the final product, also in comparison with the stainless bolt Subscribe for more of my content. I&uploading videos about mechanical stuff, as new creations and buildings and also restorations. Thank...