Tutorial: How to use RomRaider road dyno (BMW e36 MS41 example)

How to plot a pull on the road dyno: make a simple "log to file" with the highest refresh logging rate as possible (mine was 8-9 values per second), I took only rpm and TPS as values (that&all needed). Before starting the log be sure to have "absolute time stamp" disabled in RR logger settings. this allows to have a time format readable by the dyno. If you didn&see next point The csv you get from the pull&log has a time in the following format "00:00:00.000" if you have "absolute time stamp" enable in RR setting Just remove each separator to get a string as a simple integer; 14:15:11.087 becoming 141511087. Make this for each time cell. Have you dyno cars_def correctly defined for your car, and use the function "load from file". your TPS need to be at least 98% for the dyno to detect the pull. If not (like it was for me, 78% at WOT) then you need to edit the logger definition file "P13" of your ecu to get the tps read over 98 at wot.