prado 2700 with VT twin screw supercharger kit installation steps

Vt twin screw supercharger Prado 2700 installation steps explain Vt twin screw supercharger installation steps Check if the original car is running properly before installation and ensure that the engine is modified. Remove the air intake muffler and EGR valve sensor to disassemble the solenoid valve. After the gasoline pipe and brake vacuum tube are disassembled, seal the air inlet with tape to avoid dust and foreign matter. Drill through the water-cooled seal. Replace the original car seal with the water-cooled base. The pressure relief valve and the positioning pin are installed after the rotary seal ring and the positioning pin are assembled. The supercharger body kit is installed. The surrounding gasoline pipeline and the brake vacuum tube need to be placed in advance. The original vehicle seal ring EGR valve sensor and the exhaust gas pipeline installation position are not left. The belt needs to be installed with an air flow meter, the crankshaft position sensor and the grounding wire to fix the computer computer vacuum tube to install the iron wire and the fuse position. In the process of filling the antifreeze solution, the air cooling socket air screw must be opened in advance.