More Printable Upgrades for your Neptune Printer (Part 2)

Thats Part 2 of the series where i show modifications and upgrades on my Elegoo Neptune 4 Pro. This time they need some additional Parts, like screws, rods, T-Nuts etc. Most of the parts should also fit the Neptune 4 Plus and 4 Max (not the sabilizers in this video, but the webcam and many others from part 1), as well as for the Neptune 3 series printer. The Upgrades video Part 1 is here: Here are all the Links to the Parts i used in this video: (Set it to 95% size in slicer for the last piece to attache directly to the webcam shown in the video) Additional parts required for the modifications shown: Webcam Aliexpress 1080p: 2020 M4 T-slot nuts: M4 screws: i used Flat head screws with a length of 10mm and 16mm M8 nuts: from your local hardware store, you need 12 for the 3 stabilizers shown in this video, if you build it with 4 stabilizers, you will need 16, if you only build it with 2 - you will need 8... 2 x 100cm M8 threaded rods: from your local hardware store, you can even use M10 rods for more stability, the stl-Files for the fitting M10-Prints are also here: