MS5308 test with 7x NiMh inboard batteries (max 10v, min 8.55v)

Аватар автора
Секреты Творческого Прогресса
This is a test to establish lowest voltage battery use for the unit, not a calibration test. Batteries being used, 7x BTONE AA 2500mAh NiMH (min 2300mAh) similar to Sanyo Eneloop XX, and one dummy battery to allow 7 batteries to work in an 8 battery holder proving the full battery capacity until depletion just above unit shutdown at ~8.55V Components under test: .0025 ohm test standard resistor; 1mH to 5mH variable inductor; 10 ohm 1% resistor; 1k Ohm resistor; 1.2uF to 40pF decade capacitor 10 Mohm resistor; 3900pf mica capacitor; 1000uf electrolytic capacitor; .1uf film capacitor; .05uf ceramic capacitor; .001uf polystyrene film capacitor.

0/0


0/0

0/0

0/0