HP Laserjet M1005 - Duplex Printing

Printing on both sides on windows PC NOTE: The printer driver also contains instructions and graphics for manually duplexing. STEP :1. In the software program, open the device properties (printer driver). STEP :2. On the Finishing tab, select Print on Both Sides (Manually). NOTE: If the Print on Both Sides option is dimmed or unavailable, open the device properties (printer driver). On the Device Settings tab or the Configure tab, select Allow Manual Duplexing, and then click OK. Repeat steps 1 and 2. STEP :3. Print the document. STEP :4. After one side has been printed, remove the remaining media from the input tray, and set it aside until after you finish your manual duplexing job. Printing on both sides (Macintosh) (Using features in the Macintosh printer driver) STEP :1. On the Print dialog, select Manual Duplex. STEP :2. In the Manual Duplex area, select Print on Both Sides (Manually). STEP :3. Print the document. STEP :4. After one side has been printed, remove the remaining media from the input tray, and set it aside until after you finish your manual duplexing job. STEP :5. Without changing the orientation, remove the printed stack from the output bin, and then straighten the stack. STEP :6. Maintaining the same orientation, place the stack of media in the input tray again. The printed side should be facing down with the top edge feeding into the device first. STEP :7. On the device control-panel, click OK and wait for the second side to print. HP Laserjet M1005...