KUGOO KIRIN G3 Speed Limit Activate & Cancel Tutorial (G3开启&关闭限速教程)

PS: the rear wheel should be lifted and able to rotate during this procedure. Methods for activating and deactivating speed limits: Turn on the scooter, hold the brake lever, and double-click the [on/off] button continuously to release the speed limit mode. The setting method is also the same operation method. Here is a description of how to use the buttons: 1. [on/off] button: Press and hold to turn on/off the scooter. Short press once in a row to switch the light; Press 2 times in a row to switch the speed gears. 2. [Light] button. Short press to turn on the light to enter the light use mode: 3 modes. The first mode turns on the front lights of the scooter; the second mode turns on the taillights; the third mode turns on the sidelights; turn off the lights in a short press. 3. [Mode] button: short press to switch the speed gear. Press and hold to start or turn off the cruise control. Cruise control mode: The scooter is set to cruise control mode. Press the accelerator to ride. After the accelerator is released, the scooter will continue to drive at the current speed without pressing the accelerator. Release method: Press the brake, or continue to press the accelerator to accelerate to solve the cruise control. (Kindly Tip: Please pay attention to safety when using this cruise control mode. The cruise control still will continue to ride when the accelerator is released. To stop, you need to press the brake.) 4. [Set] button: short press to switch the mile-kilometer...