2014 Infiniti QX80 - Automatic Drive Positioner (if so equipped)

The automatic drive positioner, if so equipped, enables you to store two sets of positions for the driver&seat, steering column and outside mirrors using these controls on the driver&side door. To save a set of positions: • First, ensure that the shift lever is in the Park position and that the ignition is switch is in the ON position. • Adjust the driver&seat, steering column and outside mirrors to the desired positions by manually operating each adjusting switch, • Push the SET switch and, within five seconds, push the memory switch one or two, for at least one second. • The indicator light for the pushed memory switch will come on and stay lit for approximately five seconds. • When the indicator light goes off and, if so equipped, a chime sounds, the procedure is complete. When a new set of positions is saved to memory, the previously stored positions for that switch are deleted. Stored memory positions can also be linked to an Intelligent Key. First, create a stored memory position. Then, during the final step when the indicator light for the memory switch being set is illuminated for 5 seconds, press the unlock button on the Intelligent Key you wish to link. For a second driver, repeat this procedure using the other Intelligent Key. If your vehicle is equipped with the Entry / Exit Function, the driver&seat will slide backward and the steering wheel will move up when: • The driver&door is opened with the ignition switch in the LOCK position, or • The ignition...