Xerox B225/B235 Re-Install Missing or Unresponsive Cartridge (31.40C ) || Xerox B225/235 Toner Erro

A "Re-install missing or unresponsive imaging unit 31.60C" error message appears on the printer display. 1-Perform a power-on-reset (POR) by powering the printer off and power it back on. For more information, refer to Power the Printer Off and On. 2-Open the printer front door and remove the supplies. 3-Remove the toner cartridge from the imaging unit to separate the two supplies. 4-Inspect the toner or imaging unit for any debris, packing material, or damage. 5-Insert the toner cartridge back to the imaging unit, install back the supplies to the printer and close the front door. 6-Replace the Toner Cartridge. Note: Make Sure a Genuine Xerox Toner (Dry Ink) Cartridge is Being Used. Off brand or white label products can adversely affect the operation of the device and are not supported. 7-If the error persists, replace the Imaging Unit. For details, refer to Replace the Imaging Unit. 8-If the problem persists, contact Support for additional assistance. keyword-. New Toner Cartridge Install Toner Cartridge Error Toner Chip Replace What is error code 31.60 on printer How do you fix an unresponsive imaging unit Fault Code: 31.40C and 31.60C Errors Appearing on the Printer b225 xerox xerox b225 toner refill xerox b225 replace imaging unit xerox b225 replace Toner Cartridge Re-Install Missing or Unresponsive Cartridge (31.40C ) reinstall missing or unresponsive cartridge Xerox B225 reinstall missing or unresponsive cartridge 31.40 reinstall missing or unresponsive...