DTC Acura P0970 Short Explanation

The video focuses on the basic Acura-specific diagnostic error code. Contents: - Basic DTC analysis according to OBD2 protocol standard. - Insight into programming - an explanation of what a bit is and how a byte is formed - decoding the Error Code to the base programming - A diagnostically understandable description of the Diagnostic Trouble Code - Basic error definition - Possible causes or errors of the car and its parts describing the mentioned error We will continue to work on improving the content. Our efforts at Maxidot s.r.o.the video content gets better. Make: Acura Code: P0970 Definition: Problem in A/T Clutch Pressure Control Solenoid Valve C Circuit Description: The measured current for the PCMs command value is 0.2-0.4, duty cycle 57-89%, low imput failure. Engine is running with battery voltage at 11 volts, DTCs P0962, P0963, P0966, P0967, P0971 are not active. The execution time is continuous and the duration time is 1 seconds or more. NOTE: This code is caused by an electrical circuit problem and cannot be caused by a mechanical problem in the transmission. Cause: Poor connections and loose terminals at A/T clutch pressure control solenoid valve C and the PCM "Open" or "Short" circuit between PCM connector terminal and A/T clutch pressure control solenoid valve C "Open" circuit between A/T clutch pressure control solenoid valve C and ground, or poor ground Faulty A/T clutch pressure control solenoid valve C PCM needs to be updated with the...