How to Thoroughly Clean Carburetor Bolens 450e 125cc Carburetor Briggs & Stratton Push Mower Bolens

1. Remove the carburetor from the 450e 125cc Bolens Mower by MTD 2. Clean carburetor exterior by spraying it with a carb cleaner 3. Remove the 2 screws from the bottom of the carburetor aka bowl 4. Get a pick to separate the bottom bowl - slowly to prevent fuel or gas from spilling. 5. Remove the Float by removing the pin holding the float in place... be careful - lift slowly to prevent the needle from flying or dropping. 6. Clean the bowl / inspect the float for fluid intrusion / replace as needed 7. Lift the white carb jet assembly - clean all holes - optional: Separate and clean again thoroughly by spraying it with carb cleaner 8. clean carb body 9. put everything back as it was. Use this video as guide.