How To Change The Coolant In Your Honda CB1000R Motorcycle

Here we show how to properly change the coolant in a 2019 Honda CB1000R Neo Sports Cafe motorcycle ...a part of your regular maintenance at the 3 year mark. Filmed with a Canon 70D camera in the great Pacific Northwest. 0:00 Introduction 0:06 Motorcycle Coolant Change (on a 2019 Honda CB1000R) 0:10 Place motorcycle on a flat, level surface 0:19 Remove the seats 0:42 Remove the tank cover 0:45 requires 5 mm hex key 1:50 Remove the fuel tank front mounting bolts 1:54 requires 10 mm socket 2:14 Lift and support the fuel tank 2:26 Remove the radiator cap 2:50 Coolant capacity: 2.75 litres 2:56 Tilt bike upright to get maximum drainage 3:05 Properly dispose of used coolant 3:16 Install the drain bolt with a new crush washer 3:33 Use only recommended coolant 3:44 This machine took 2.4 litres 3:49 Add coolant up to the filler neck 3:56 Remove the radiator reserve tank cap 4:04 Add coolant to upper level line 4:16 Shift the transmission into neutral and start the engine 4:24 Let idle for 2 to 3 minutes 4:28 Snap the throttle 3 or 4 times 4:33 this helps to bleed air from the system 4:39 Stop the engine 4:43 Top up coolant to filler neck 4:48 Install the radiator cap 4:59 Check coolant level in reservoir tank 5:12 Reinstall fuel tank and tank cover 5:31 no torque specified 5:41 Reinstall tank cover 6:29 Reinstall seats 6:48 Final check 6:58 Bring bike upright to check coolant level 7:06 Remember to check the level again after your first ride!