How to replace front brake pads asbestos-free and Brake pad wear sensor on BMW E36.

How to replace front brake pads asbestos-free and Brake pad wear sensor on BMW E36. To replace the front brake pads BMW E36 you must first open the cover of the expansion tank brake fluid for on procces replacement brake pads could without a lot of force to push the piston back to free space for new brake pads, so they can easily fit in self place and begin the process of replacing the front brake pads BMW E36. 1. Unscrew the 5 bolts that strengthen the wheel and remove the front wheel. 2. Turn off the brake pad wear sensor. 3. Remove the clip that holds the caliper body to the caliper holder. 4. Remove the protective plugs and unscrew the 2 guide bolts. 5. Remove the caliper body and pull out the old worn brake pads. 6. Press the piston back, if there is no special tool, and you can use a screwdriver. 7. Install the new brake pads in their place and assemble in reverse order. Do not twist the guide bolts very tightly. 8. After the final assembly, close the cover of the brake fluid expansion tank and before driving the car, press the brake pedal several times so that the brake pads stand on the working place. Как заменить передние тормозные колодки без асбеста и датчик износа тормозных колодок на BMW E36. Для замены передних тормозных колодок БМВ Е36 нужно сначала открыть крышку расширительного бачка тормозного жидкости, чтобы в процессе замены тормозных колодок могли без больших сил придавить поршень назад, для освобождения пространство для новых тормозных колодок...