Harmon Kardon 330C Receiver-Beautiful and Working. ZCUCKOO

Here is my Vintage Harmon Kardon 330C Receiver. I serviced this receiver. I also set the DC Idle Current per manufactures specifications. All switches and Pots have been cleaned with DeOxit and work noise free. These HK 330C&have a bit of a following according to the web. You can google the model number and check it out. This receiver is 45 Watts per Channel. Has Phono, AUX, and 2 Tape Inputs/Outputs as well as FM Stereo/AM. The Following has been REPLACED with New Parts. **43 Electrolytic Capacitors, That&ALL except the two Large Caps. **4 Tantalum Capacitors. Only 4 in unit. **12 Pre-Amp Transistors. 4 in the Phono Pre-Amp Board, two in the FM section, and 4 more on the Tone Board which was also recapped. (I know, I&being redundant) New Lamp for Power Switch Illumination. All other lamps are working as they should. 47 Total Capacitors have been replaced with Audio Grade Caps in this receiver. That&basically ALL except for the two large caps seen in the pictures. Power Switch lamp has been replaced. FM Stereo Indicator Lamp, Signal Strength Functions as it should. All Pots and Switches have been Cleaned with De-Oxit, then Lubed with Fader Lube. The Phono board had had a failing channel so I went ahead and replaced all 4 transistors as well as all caps on the board. I went ahead and just did all the caps (except the two I mentioned) since I had it open. This unit is fully working and Really sounds Nice. Metal housing as well as the cover is Flawless. There are a few...