CENTURY AOKE丨Seasons Copy Remote Control Duplicator Operation

CENTURY AOKE丨Seasons Copy Remote Control Duplicator Operation ENHANCED TYPE COPY REMOTE CONTROL OPERATION INSTRUCTIONS: 1. Clearing method: Press and hold the front (upper) buttons at the same time, the LED indicator flashes three times, release any one of the buttons (the other one keeps pressing and holding), press the released button three times, and the LED indicator enters Fast flashing status, indicating that the clearing code is completed (the remote controller has been cleared, short press, the LED indicator does not light). Note: Press the two buttons as much as possible at the same time, otherwise it will not enter the clear code state. 2. Copy: One hand holding the original remote control, the other hand-held copying remote control, the two remote controls are close to each other, respectively press the button to be copied, the LED indicator flashes three times and then lights up continuously, indicating that the copy is successful, other buttons the operation method is the same. Note: If the post-copy function is not normal, please clear the code and copy it again. (Recommended: replace the original remote control battery before copying) 3. Recovery instructions: If the useful code is cleared by mistake, you can press the two buttons on the back (below) of the remote control at the same time without recopying the other remote controllers. After the indicator flashes rapidly for 3 times, the recovery is successful. If you have any questions, please feel free...