Details about Guitar Effect Pedal Delay True Bypass

Description: AC/DC Adapter Jack * By using an AC adapter, you can play without being concerned about how much battery power you have left. * Use only the specified AC adapter, and connect it to an AC outlet of the correct voltage. * If the AC adapter is connected while power is ON, the power supply is automatically from the AC adapter. * We recommend that you keep batteries installed in the unit even though you power it with the AC adapter. That way, you will be able to continue a performance even if the cord of the AC adapter gets accidently disconnected from the unit. Time knob * This knob adjusts the delay time. It allows to finely adjust the delay time from 50 ms to 400 ms. Turning this knob clockwise increases the delay time, and counterclockwise decreases it. Output jack * Connect this jack to your amp or to the input of another effect pedal. Pedal Switch * This switch turns the effect ON/OFF. Indicator * This indicator shows whether the effect is ON or OFF. When the effect is ON, the indicator lights. * If when you power the pedal with a battery and the indicator goes dim or does not light at all by turning ON the effect, the battery is near exhausted and should be replaced. * The indicator shows only whether the effect is ON or OFF. It does not indicate whether the power to the pedal is ON or not. Feedback knob * This knob decides how many times the delay sound is to be repeated. Turning this knob clockwise increases the number of repetition of delay sound, and...