How To Remove 2011 - 2020 Toyota Sienna Spare Tire - Spare Removal Jack Location - Change Flat Tire

A video tutorial on how to remove the spare tire from a 2011 - 2020 Toyota Sienna. If you need to change a flat tire on your Toyota Sienna or simply just want to remove the spare tire you should do the following. TO REMOVE THE JACK AND TOOLS: 1. Remove the cover. 2. Remove the adapter socket. 3. Remove the jack. 4. Remove the wheel nut wrench. TO REMOVE THE SPARE TIRE: 1. Slide the front passenger’s seat to the front most lock position and the right side second seat to the rearmost lock position so they will not interfere with the jack handle. 2. Open the right side sliding door and you will find the flap on the floor. Pull back the flap to find the spare tire clamp bolt. 3. Attach the adapter socket over the spare tire clamp bolt. Connect the jack handle and the adapter socket. Turn the jack handle. The tire will be lowered completely to the ground. 4. Take the spare tire out from underneath the vehicle and remove the holding bracket. This video tutorial will show you the location of as well as how to change or remove the spare tire on the following Toyota Highlander models: 2011 Toyota Sienna ( LE, XLE, SE and Limited ) 2012 Toyota Sienna ( LE, XLE, SE and Limited ) 2013 Toyota Sienna ( LE, XLE, SE and Limited ) 2014 Toyota Sienna ( LE, XLE, SE and Limited ) 2015 Toyota Sienna ( LE, XLE, SE and Limited ) 2016 Toyota Sienna ( LE, XLE, SE and Limited ) 2017 Toyota Sienna ( LE, XLE, SE and Limited ) 2018 Toyota Sienna ( LE, XLE, SE and Limited ) 2019 Toyota...