How to use Miracle Box to flash firmware to Qualcomm Android

Drop a comment below if you have questions or reach out to us on the following platforms: 00:10 In this video tutorial, I&be explaining how to flash a Qualcomm Android device&firmware 00:15 using Miracle Box. To do this, you need to have your Miracle box and firmware you intend to flash 00:24 and you need to have installed your Qualcomm USB drivers, we have a guide on how to do that. 00:29 Once you have all these in place, you launch Miracle box and wait for the dashboard to come up 00:40 00:56 Good! Once Miracle box comes up, you click on the Qualcomm tab then you click on the Flashing tab. 01:04 You¬ice that Port is empty so you need to load that entry. To do that, you launch 01:12 Windows start menu and you search for device manager. You just press the Window button 01:18 search for device manager and launch. In device manager, you take note of the Ports. 01:27 that you have available. Now, you boot the device into EDL Mode then you connect it to the PC 01:32 via USB cord. Now, the device should get detected as Qualcomm HS-USB QDLoader 9008 01:47 once you have this, go back to Miracle Box then you click on Port and now, device should get detected 01:55 Next, you untick Auto then click on the Write Flash tab. Now, click the Browse icon in front of Programmer 02:05 and navigate to the firmware folder. In the firmware folder, you select the programmer file 02:14 and you click on Open. Click the browse icon in front of RawProgram, select the rawprogram(...