Mercedes-Benz GL - How to remove / install the center console | X164.8 / W164

Аватар автора
Турбо-развлечения
Removing the center console on the GL First remove the faceplate of the ashtray. This gives you access to the center control panel from below. First pull it out carefully downwards and then press it upwards slightly. Now remove the control panel and disconnect the electrical connectors. There are two screws on the ashtray which have to be removed. Then you can carefully pull the ashtray out. There is also a connector on it which has to be disconnected. After that, start working on the beverage holder in the center console. Use an assembly wedge to remove the plastic trim. Two screws have to be removed. Then you can take out the beverage holder. There is an electrical connector which has to be disconnected. There is a clip in the installation opening which also has to be removed. The next screws to be removed are located in the stowage compartment. You also have to remove the two screws at the front underneath the ashtray installation slot. The seats must be set to their rearmost position to remove the center console. The center console is also connected to the on-board electrical system. Disconnect all of the connectors. Now you can finally remove the center console. Carefully pull out the console towards the rear. This is what the interior compartment of the GL looks like without the center console. -------------------------------------------------------------------------------------- instagram: twitter:

0/0


0/0

0/0

0/0